College Athletes Must be Held to the Same Standards as...

Despite a tendency for institutions to be lenient with college athletes, as they enjoy the benefits of full-time-student status, they must be held to the same standards as non-athlete students. Every institution has an obligation to set attendance rules; students who attend these institutions have an obligation to abide by them, however, in actuality, professors chose whether or not they’re enforced. This may cause significant problems between other students targeting a player, rather than who is responsible, the Professor. Although institutions want their students equally treated, diversity is well accepted. Existence as a college athlete contributes to diversity as well as a substantial amount of favoritism. Issues arise pertaining to†¦show more content†¦Furthermore, Community College professors are easier to work with due to smaller class size, rather than a University, where class sizes are so large, one may never met the professor. There are various obstacles to overcome in college-athletics; ones that are mentioned are just to name a few. Although many argue in defense of college-athletics, to elaborate on the few obstacles mentioned, one might put more detail in how stress and anxiety can be reduced simply by exercise. Exercise is great for brain functioning as well as the body. A decrease in stress may help a player to perform well on assignments, and the field. To help a player into a positive mental state, couches have put together certain stretches that specifically target anxiety pressure points. When an athlete is in a positive mental state, he/she is able to perform well. Players are also able to control their thinking, remove tension, and conserve energy using the special techniques provided. Generally, techniques used for relaxation, should result in decreased blood pressure, heart rate, breathing rate, and decreased body metabolism. Another benefit of college-athletics, is the substantial amount of class time one may miss, this gives an opportunity for other students to have one-on-one attention with their professor and peers. Smaller class size contributes to individual success. Now, other advantages of missing class includeShow MoreRelatedShould Student Athletes Receive Compensation for Upholding a Higher Standard?922 Words   |  4 PagesStudent athletes entertain fans at their local resident arena, which generated five million and six hundred thousand dollars in ticket sell in 2012 (National College Athletic Association). This is not fair to student athletes that are solely responsibility for contributing to these financial statistics. Student athletes are leaders in the classrooms and on the field. Student athletes uphold the standards requirement by the NCAA to maintain their eligible to play sports. As leader on the fieldRead MoreSports Are More Important than Education1484 Words   |  6 PagesAs of 2007, a total of 15.6 million undergraduate college students attended school in search of a higher level of education (How Many?). In spring of 2013, only 14,473,884 students attended an American college or university, constituting a decrease of 1,126,116 students compared to 2007 (College Enrollment ). One reason for the decrease is that some students do not have any plan for after high school, however most student-athletes do. It is often said that education should come before anythingRead MoreCollege Athletes Are Banned For Playing A Sport1593 Words   |  7 PagesCollege athletes are put into games that are not only televised nationally, but sometimes even worldwide. They gain acknowledgement similar to famous figures that any other person would covet. What goes unnoticed is the life behind the player. How’s their school grades? What do they do with their time? Being a student athlete means that person must manage time between school work and a busy sport schedule. This person also must fulfill the academic requirements of a student athlete to be eligibleRead MoreShould College Athletics Be Paid?1738 Words   |  7 PagesShould college athl etics be paid College athletes devote much of their time and energy to their teams, and in return the teams often receive a big-time deal, College athletics spend at least 43.3 hours per week to practice and have a commit to the team. Have you ever wondered why teams are so good, the reason for that is colleges recruit the best players around the country or state so their team overall can be the best all time. So why not pay the athletics if colleges are getting ranked playersRead MoreA Study On The Education System1326 Words   |  6 Pagesâ€Å"not judge a fish by its ability to climb a tree†. Yet, in our education system we â€Å"judge† every student’s ability to function at a four-year university daily. When taking an exam we are all given the same aptitude exams, university standards or even the notorious EPT/ELM exam for a CSU. Having the same exam diminishes the idea of a specialty being shown through oneself. In our world today, we have many individuals with a variety of specialties contributing to the creation of a society. Many successfulRead More College Athletes Should Not Be Paid Essay1888 Words   |  8 Pagessocializing, but the life of a student athlete is anything but ordinary. Sleep, eat, practice and school are all an athlete knows, and with the pressures of campus life it becomes even more difficult. No time for much of anything, let alone getting a job. Like most students, these athletes need money, but do not have a spare moment to work. Without any source of income, athletes are put at a major disadvantage. Their full-time job is athletics, in addition to rigorous college-level courses. The possibilityRead MoreCollege Athletes Should Not Be Paid1866 Words   |  8 Pages College Athletes Should Not Be Paid Waking up before the sunrise is a daily routine. Early morning film sessions, class, then practice, which dominates the day. There are few moments in between for food and socializing, but the life of a student athlete is anything but ordinary. Sleep, eat, practice and school are all an athlete knows, and with the pressures of campus life it becomes even more difficult. No time for much of anything, let alone getting a job. Like most students, these athletesRead MoreCollege Athletes Financial Compensation4427 Words   |  18 Pagesmodify the current NCAA amateurism by law 12.02.1 making it feasible for college athletes to receive financial compensation. The primary issue with the current regulation is that because of the rule many student athletes are living in poverty like conditions. The current by law is also affecting various aspects of domestic and International students ability to continue to meet eligibility requirements. In the past ten years college athletics as a w hole has grown exponentially and it’s clearly evidentRead MoreThe Legality, Morality, Social Responsibility of Paying College Athletes8736 Words   |  35 Pages| | | | | Date of Submission: 12/021/2012 Title of Assignment: Term Paper – â€Å"Integrating Values – The Legality, Morality, and Social Responsibility of Paying College Athletes† CERTIFICATION OF AUTHORSHIP: I certify that I am the author of this paper and that any assistance I received in its preparation is fully acknowledged and disclosed in the paper. I have also cited any sources from which I used data, ideasRead MoreCollege Athletes: Amateurs or Full Time Employees 2025 Words   |  9 PagesEver since college students started playing sports, back in 1879 when Harvard played Yale in the first collegiate sports game, the question of whether college athletes should be paid was addressed. From that point on athletes, coaches, and college administrators have brought forward points agreeing or disagreeing with the notion of paying college students. The students argue that they deserve to be paid due to the revenue that they bring for the college and because of the games they play and the

Lucian Freud Essay - 2816 Words

Lucian Freud Freud, Lucian (1922- ). German-born British painter. He was born in Berlin, a grandson of Sigmund Freud, came to England with his parents in 1931, and acquired British nationality in 1939. His earliest love was drawing, and he began to work full time as an artist after being invalided out of the Merchant Navy in 1942. In 1951 his Interior at Paddington (Walker Art Gallery, Liverpool) won a prize at the Festival of Britain, and since then he has built up a formidable reputation as one of the most powerful contemporary figurative painters. Portraits and nudes are his specialities, often observed in arresting close-up. His early work was meticulously painted, so he has sometimes been described as a `Realist (or†¦show more content†¦Freuds subjects are often the people in his life; friends, family, fellow painters, lovers, children. As he has said The subject matter is autobiographical, its all to do with hope and memory and sensuality and involvement really. Paintings in the exhibition will range from Girl with Roses 1948 to Garden, Notting Hill Gate 1997, and highlights include the marvellous series of portraits of his mother, portraits of fellow painters John Minton, Michael Andrews and Frank Auerbach, and other major works including Large Interior W11 (after Watteau) 1981-3. Sharp pictures of his youth will contrast with the works of his maturity, paintings filled with life and liveliness, each in its way a celebration. I paint people, Freud has said, not because of what they are like, not exactly in spite of what they are like, but how they happen to be. Until the mid 1950s, Freud worked in a tightly focused style, which he had begun to use at the East Anglian School of Drawing and Painting, run by Cedric Morris. The school was very informal; as Freud said, there was No teaching much but there were models and you could work in your own room. In many ways he worked by trial and error: Landscape with Birds (no. 3, shown in room 1) was an experiment with the kind of enamel paint he thought was used by Picasso. As he said later, Learning to paint is literally learning to use paint. Around 1956 Freud exchanged his finely pointedShow MoreRelatedMichael Andrew s Lights Iv : Pier And Road1292 Words   |  6 PagesAccording to the label text, in Kitaj’s Isaac Babel Riding with Budyonny, Kitaj paints his wedding day to American artist Sandra Fisher, and some of his friends from the School of London artists. The artists that Kitaj includes in his painting are Freud, Frank Auerbach, Leon Kossoff, and David Hockney. 19. In Kitaj’s Issac Babel Riding with Budyonny, there are straight lines and irregular lines. 20. According to the label text for Kitaj’s Issac Babel Riding with Budyonny, â€Å"Issac Babel (1894-1940)Read MoreThe s First Retrospective Exhibition1196 Words   |  5 PagesLucian Freud was a German born British artist. After being born on December 8th of 1922, he lived in Berlin for 11 years. His family then moved to London, England because of the rise of Nazism. He studied at the Central School of Arts in London for a year, then from 1939-42 at the East Anglian School of Painting and Drawing in Debham and in 1942-43 at Goldsmiths College in London. He had his first solo exhibition in 1944 at the Lefevre Gallery. Before moving to Holland Park, Freud owned a studioRead MoreParker V Balfour1 Case Study2007 Words   |  9 PagesAlex (A) and George (G) raises three issues: (1) are contracts between spouses valid, (2) if so, is A entitled to enforce the valid contract allowing him to continue staying in the house shared with G and (3) is the agreement for the sale of further Lucian Prints between A and G sufficiently certain to constitute a valid contract. Addressing the first issue, the general rule, as derived from the judgment delivered by Lord Atkins in Balfour v Balfour1 is that domestic agreements are not presumed toRead MoreThe Treatment of the Human Figure: a Travel Through Time1231 Words   |  5 Pagesfigure into simple shapes, colors and values, and the exploration of the human figure in the context of movements such as Impressionism. To begin, reality serves merely as a starting point for the first artists being examined, Marian Wagschal and Lucian Freud. The human figure in their works strives to capture raw, unpleasant features of the body. Wagschal puts a strong emphasizes on depicting the wrinkles, aged, and tired characteristics of her models as seen in one of her most notable works â€Å"PortariatRead MoreSummary Of Ways Of Seeing By John Berger2448 Words   |  10 PagesI will be making connections from the works of art to my goal. The works that will be analyzed for this paper will be: â€Å"Triptych May-June 1973† by Francis Bacon 1973, â€Å"Self-Portrait as a Warrior† 1909 by Oskar Kokoschka, â€Å"Girl in Bed† 1952 by Lucian Freud, â€Å"Wheatfield’s with Crows† 1890 by Vincent van Gogh, â€Å"The Volunteers† 1920 by Kathe Kollwitz and â€Å"The Scream† 1893 by Edvard Munch. Francis bacon was an Irish born painter who had first started off as an interior designer and then had moved intoRead MoreFrancis Bacon s En Dublin, Irlanda En 19091073 Words   |  5 Pages(1925) de Picasso, Sin embargo este cuadro tampoco fue bien recibido y Bacon abandonarà ­a la pintura por casi una dà ©cada. Bacon no participo en la guerra debido a su asma, pasà ³ pintando 1941 en Hampshire, antes de regresar a Londres, donde conocià ³ a Lucian Freud. A partir de estos aà ±os surgieron las obras que mà ¡s tarde serian consideradas como el comienzo de su carrera. En 1944 termina Three Studies for Figures at the Base of a Crucifixion, la obra que lo posicionara como uno de los pintores brità ¡nicosRead MoreVisual Propaganda For Armed Conflict Comment2298 Words   |  10 Pages By May 10, 1933, Nazis raided libraries and bookstores across Germany. On that night, 25, 000 books were burned (The Holocaust Museum). The Nazis destroyed thousands of books, including works by Jewish writers such as Albert Einstein and Sigmund Freud. The Nazis also burned the books of the famous American writer Helen Keller, who, when told of the book burnings, responded with: ?Tyranny cannot defeat the power of ideas. Despite the nationwide outcry by hundreds of thousands of people in the UnitedRead MoreWhat Constitute Happiness to Man6479 Words   |  26 Pagesthink, between those in Platos cave who can only marvel at the shadows and images of various objects, provided they are content and dont know what they miss, and the philosopher who has emerged from the cave and sees the real things? If Mycillus in Lucian had been allowed to go on dreaming that golden dream of riches for evermore, hed have had no reason to desire any other state of happiness. It is clear from this passage that Erasmus is using the word happiness in its psychological sense, in which

Development Tracked Climbing Of Intelligentâ€Myassignmenthelp.Com

Question: Discuss About The Development Tracked Climbing Of Intelligent? Answer: Introduction The application is for the mobility of the robots and to handle the high place factors which works over cleaning over all the other outer walls of the high-rising buildings. The inspection of the storage tanks in the nuclear power plants is important for the performance mainly by the human operators so that a proper and the specific research in the field of mobile robotics could be done. The climbing of the vertical sauces is researched and developed over the world where the most climbing robots tend to handle the locomotion and the adhesion. The adhesive mechanisms with the climbing of robots can attach to the wall (Chu et al., 2010). This is mainly using suction form and the magnetic force for the inter locking and handling the climbing environment which is composed of ferromagnetic surface. The robot marketing use of the micro spine which can attach to the different rough surfaces of the wall. The mechanism is found to be novel based on the value that adheres to the force of adhes ion set by the roughness of the surface. There is a need to properly research about handling the suction pads and work on the applicability and the robustness when compared to the other adhesive mechanisms (Fischer et al., 2007). The case of the locomotive mechanism is based on handling the legged mechanisms with the sliding and the tracked wheel mechanisms. Here, the major advantage is about employing the legged mechanism that can overcome any of the uneven surfaces on the system. Literature Review The research is based on the realization of the sliding mechanism with the legged mechanism that determines about the speed which is low mainly due to the discontinuous motion. The use of the tracking wheel mechanism where one can move faster with the continuous motion employs a chain track with suction pads. The employing of the control of suction pads is mainly controlled by the solenoid valve which is found to be of the larger size with the forms that include the length of 720mm and the width of 370mm (Kim et al., 2008). The new concept of the paper is about handling the climbing of the robot with the continuous motion presented. The locomotive function with the higher speed of climbing is mainly realized with adapting to the series of the chains that are on the two tracked wheels. There are different 24 suction pads which are involved with the use of the mechanical waves (Kim et al., 2010). The paper has also been about the structure which is depending upon the engineering design. The engineering analysis is based on controlling the required force of suction and the tendency is mainly to maintain the pressure which is in the system. The experimental results are related to the climb of the speed and the payloads as described (Lee et al., 2003). This also includes the climbing performance with proper optimisation of the experiment to maximise the pressure of the vacuum and minimise the fluctuations of the suction pads vacuum pressure. This is through the Taguchi methodology that has been adopted. Evaluation The tendency is to match with the main frame systems with the proper handling of the wheel tracking that has been set to take hold of the vacuum pumping methods with the actuation modules. (Lee et al., 2012). The tracked wheel system is based on the timing of the belt and the pulley where there are 12 suction pads. The movement is based on guiding the suction pads which is according to the wheel rotation and through the controlled operations of the mechanical valve setup (Menon et al., 2004). The wireless control system with the on/off control of the valve is to handle the mechanism which is mainly operated by the wheel rotation. The only change is in the driving motor with the direction and the speed change (Zhu et al., 2002). The working is also based on how the tracked wheel mechanism is for the robot which can employ the wheels with the locomotive mechanism. The continuous comparison has been done to the other climbing robots using the legged or the sliding mechanism where the speed of the climbing of the robot is improved (Prahlad et al., 2008). The operations are based on how the mechanical valve is chocked mainly due to the spring which is in the valve and which tend to close the opening. The curved profile with the free flow mainly occurs between the suction pad and the vacuum pump (Seo et al., 2011). The analysis is based on the fact to handle the slipping or the robot climing, where there is a sufficient suction force that can handle the robot weight as required. The tendency to handle the vacuum pressure change is dependent on determining the force of suction in the system of the robot, which includes the pressure of the vacuum that needs to handle the requirement of the sustainable weight of the robot. There are approximately 24 suction pads which are for the robot systems which are directly connected to the vacuum pump (Seo et al., 2013). The mechanical value is set when there are different suction pads which are attached to the wall by the wheel rotation. Hence, the major effect is with the periodic function with the addition of the volume that includes the exertion of the robot performance (Yan et al., 1999). The volume flow rate of the pump mainly depends on the pressure which includes the addition to the working of the vacuum pump. Here, the simulation is based on handling the performances which are depending upon the experiments related to the speed of climbing. (Xu et al., 2002). For the optimisation of the experiment, Taguchi methodology has been used for the proper approach which is designed for the time-consuming factors, which also includes the making of use of the different classified systems. The importance is based on determining the product quality and then setting the configurations which are for determining the levels set with the typical control levels. The levels are also displayed with the undesired parameters when related to the experiment. The objectives of the control factors and the noise factors is to take hold of the minimisation of the pressure of fluctuation (Shen et al., 2005). Conclusion The major focus has been on handling the maximisation of the function with the timing that is based on handling the change in pressure as well. There are control factors which are the diameter of the pneumatic tube, with the configuration of the profile cam and the other air tunnels which are used in the valve. This is set with the control factors which could easily be determined through the fine-tuning process (Silva et al., 2008). The wall-climbing robots makes use of the tracked wheel mechanism where there is a continuous locomotive motion with the higher speed to climb. This could easily be achieved through the suction pads which have been installed with the detail about the mechanical valves of the system. References Chu, B., Jung, K., Han, C.S. and Hong, D., 2010. A survey of climbing robots: Locomotion and adhesion.International journal of precision engineering and manufacturing,11(4), pp.633-647. Fischer, W., Tche, F. and Siegwart, R., 2007, October. Inspection system for very thin and fragile surfaces, based on a pair of wall climbing robots with magnetic wheels. InIntelligent Robots and Systems, 2007. IROS 2007. IEEE/RSJ International Conference on(pp. 1216-1221). IEEE. Kim, H., Kim, D., Yang, H., Lee, K., Seo, K., Chang, D. and Kim, J., 2008. Development of a wall-climbing robot using a tracked wheel management.Journal of mechanical science and technology,22(8), pp.1490-1498. Kim, H.W.A.N.G., Seo, K.U.N.C.H.A.N., Lee, K.Y.U.H.E.E., Kim, J.O.N.G.W.O.N. and Kim, H., 2010, August. Development of a multi-body wall climbing robot with tracked wheel mechanism. InProceedings of the 13th International Conference on Climbing and Walking Robots (CLAWAR)(pp. 439-446). Lee, C.H., Kim, S.H., Kang, S.C., Kim, M.S. and Kwak, Y.K., 2003. Double-track mobile robot for hazardous environment applications.Advanced Robotics,17(5), pp.447-459. Lee, G., Wu, G., Kim, J. and Seo, T., 2012. High-payload climbing and transitioning by compliant locomotion with magnetic adhesion.Robotics and Autonomous Systems,60(10), pp.1308-1316. Menon, C., Murphy, M. and Sitti, M., 2004, accounting. Gecko inspired surface climbing robots. InRobotics and Biomimetics, 2004. ROBIO 2004. IEEE International Conference on(pp. 431-436). IEEE. Prahlad, H., Pelrine, R., Stanford, S., Marlow, J. and Kornbluh, R., 2008, May. Electroadhesive robotswall climbing robots enabled by a novel, robust, and electrically controllable adhesion technology. InRobotics and Automation, 2008. ICRA 2008. IEEE International Conference on(pp. 3028-3033). IEEE. Seo, T. and Sitti, M., 2011, May. Under-actuated tank-like climbing robot with various transitioning capabilities. InRobotics and Automation (ICRA), 2011 IEEE International Conference on(pp. 777-782). IEEE. Seo, T. and Sitti, M., 2013. Tank-like module-based climbing robot using passive compliant joints.IEEE/ASME Transactions on Mechatronics,18(1), pp.397-408. Shen, W., Gu, J. and Shen, Y., 2005, July. Proposed wall climbing robot with permanent magnetic tracks for inspecting oil tanks. InMechatronics and Automation, 2005 IEEE International Conference(Vol. 4, pp. 2072-2077). IEEE. Silva, M.F., Machado, J.T. and Tar, J.K., 2008, November. A survey of technologies for climbing robots adhesion to surfaces. InComputational Cybernetics, 2008. ICCC 2008. IEEE International Conference on(pp. 127-132). IEEE. Sintov, A., Avramovich, T. and Shapiro, A., 2011. Design and motion planning of an autonomous climbing robot with claws.Robotics and Autonomous Systems,59(11), pp.1008-1019. Xu, Z. and Ma, P., 2002. A wall-climbing robot for labelling scale of oil tank's volume.Robotica, economics, pp.209-212. Yan, W., Shuliang, L., Dianguo, X., Yanzheng, Z., Hao, S. and Xueshan, G., 1999. Development and application of wall-climbing robots. InRobotics and Automation, 1999. Proceedings. 1999 IEEE International Conference on(Vol. 2, pp. 1207-1212). IEEE. Zhu, J., Sun, D. and Tso, S.K., 2002. Development of a tracked climbing robot.Journal of Intelligent Robotic Systems,35(4), pp.427-443.